192 168 0 1 admin login Admin Login, Setup, Password | Troubleshoot Guide 2018 Admin: There are a lot of ways to access the internet. But the majority of people around the globe have installed a router in their facilities to enjoy high-speed data anytime. But the most annoying part is the initial setup process of a router. We are here to help you with the IP address Admin and how you can use this address to setup your router.

Though the majority of routers have some manufacturers like to set Admin as the default IP address gateway for their routers. So, let us know more about gateway address and learn how to setup your router for the first time. Admin Admin
Learn How to setup 192.168.o.1 IP address using admin, password

Well, manufacturers like D Link, Netgear and some models of TP-Link routers keep their default gateway to access the settings panel as But on the contrary, a lot of other router manufacturers keep as their default gateways.

The sole reason behind choosing over is because of the conflicts. is a first IP address from the list that is allocated to a LAN or Wireless card. The numbers range from to so; sometimes the may conflict with the pre-existing connections and devices.

Furthermore, another most popular IP address that does a conflict is

So to prevent such conflicts a lot of companies have decided to come up with an intuitive solution to change the default IP to

Similarly, Xiaomi likes to keep the IP address of the routers manufactured by them to

So, it is just a way to minimize similar IP conflicts. Apart from these, IP address can be used to setup the router and you can modify or alter the settings and configurations as per your need. Here are some of the most commonly used settings that you can tweak via Admin.

  1. WiFi panel – change SSID, Passwords, other information regarding the WiFI band.
  2. Mac address filtering- to enable or disable unwanted access to your internet or router.
  3. Port Mapping – to make a home network, where you can stream videos, play games, etc.
  4. DSL and ADSL settings- to ensure that you are always connected to the internet with the use of proper ISP configuration.
  5. Status- this enables you to check the current status of your connection, uplink and downlink speeds, etc.
  6. Password manager- enables you to change and modify system default usernames and password. This will ensure that there is no unwanted access to your router using Admin
  7. QoS, VPN, and other such settings are router dependent.

How to setup your router for the first time using Admin Admin
Setup TP Link Routers using Admin IP address

Before jumping right into the configuration wizard here are some things that need to be checked first.

  • Make sure that the power cable, the internet connection cable or the phone cable (in ADSL connection) are connected properly to the router.
  • Furthermore, the router and modem need to be in power ON state to configure it properly.
  • Now, make sure you are connected to the router using the LAN cable and the LAN port or using the WiFi module.

Steps to configure your router using Admin

Once you’ve connected to your router via a wireless connection or the LAN cable. You can now proceed to the next step.

  1. Open up any browser, most preferably Google Chrome or Mozilla Firefox.
  2. And enter in the address bar and hit enter.
  3. You’ll be asked to enter the default router’s login credentials.
  4. In the majority of the cases, the default username and the password is kept as ‘admin.’ But, make sure that you are using the same username and password provided by the router’s manufacturer. (refer manufacturer guide or the backside of your router)
  5. Once you enter the username and the password, you’ll be taken directly to the router’s setting homepage.
  6. The setting page interface differs from manufacturer to manufacturer, but the control and their functioning are almost the same.
  7. You’ll be able to see all the basic controls and using the Advanced tab option; you’ll be able to see all the controls in the expanded view.
  8. You can now set up your router. Just go to the internet settings and feed in the Internet access password and username provided by your ISP and click the save option.
  9. Now, set up the WiFi on your device by entering the SSID Name, Password and choosing the right security protocols.

So far so good, but what if you start to get some error messages while doing the setup? Or you aren’t able to log in properly?

Most commons issues with Admin and their solutions

The first and the foremost matter or annoyance is because of the inability to connect to a router.

This may occur because of poor cable connection and sometimes because of miscellaneous reasons like the router may get sloppy sometimes.

  • Check all the cables and make sure that you can see the router is connected to your PC.
  • Furthermore, always make sure to enter the right password and username combination.
  • Check whether the router’s IP address ( isn’t conflicting with any pre-existing connection that has been created on your PC. If there is any, make sure to change the values.

Sometimes there is nothing you can do, in such cases resetting the modem the only option.

Here is how you can reset your router and modem.

  • Head over to and enter the admin password and username
  • Now, go to the Factory Setting Default options and choose to Rest your router to the factory settings. You may need to enter the username and password once again to confirm this step.
  • Within just 1-2 minutes the router will reset to the factory state.

If you are unable to reset the router using the Admin settings panel.

  • Grab a pin and insert it into the pinhole RESET button that is a location with on the back or the rear side of your device.
  • And press the reset button gently using the pin for 10-20 seconds. This will reset your router to the default configuration.

Now you can use the guide mentioned above to re-config the router once again. Feel free to drop your questions, if you’ve any.

For More Information About  Visit routeriplogins.com

1 comment

Most discussed