Warning: Use of undefined constant REQUEST_URI - assumed 'REQUEST_URI' (this will throw an Error in a future version of PHP) in /srv/users/serverpilot/apps/routeriplogins/public/wp-content/themes/gridlove/functions.php on line 73
192.168.1.1 Admin Login Setup Guide 2018 - Router IP Logins
RESET your router

192.168.1.1 Admin Login Setup Guide 2018

192.168.1.1 AdminSo, almost every one of us has those routers installed in our homes and offices, so that we can access the internet with ease, right? Well, setting up a router isn’t an easy task. You do get some software with the router, but it is of waste because it hardly gets updated. 192.168.1.1 is the universal IP address used by the majority of the router manufacturers around the globe.

192.168.1.1 IP address acts as a default gateway to the router’s internals. Once you’ve made a successful connection with your router, all you need to do is, make a link to 192.168.1.1 and you’ll be able to see all the router’s settings.

Let us know more about the router’s default gateway address, 192.168.1.1.

192.168.1.1 Admin

192.168.1.1 Admin

192.168.1.1, as previously mentioned is an IP address that is linked to almost all the routers (majorly). Though, there are some manufacturers who don’t follow this pattern of IP address to make the connection a little bit more secure.

192.168.1.1 Admin can be considered as a universal router’s IP address, that is found in almost all the new and old routers and modems. You’ll always need this IP address, to set up your router.

Apart from knowing the IP address, a username and password are also provided to you, to make the entry into the router’s internals can be made secure.

Furthermore, this password and username can be readjusted via the settings panel that is found on 192.168.1.1 Admin. Apart from this, you can also tweak certain settings that are related to,

  • Security Options
  • QoS (Quality of Services)
  • Port Mapping – to play games and to use an IPTV as a conjunct
  • DNS settings
  • WiFi setup and settings
  • LAN
  • WAN
  • DSL
  • ADSL
  • MAC activation and deactivation and blocking
  • WPS enabling, disabling and blocking
  • Network Management
  • The present status of the uplink and downlink can also be seen.

The user interface may differ from each router, but the controls and functions are almost kept the same. 192.168.1.1 Admin will give you access to reset your router to default factory settings too.

You can also, update the router’s firmware to the latest version via 192.168.1.1 Admin.

Furthermore, to make the router’s interface even more secure, you can set multiple usernames and password, about multiple users in your offices and home. This will ensure that any major change can be reverted with the master password.

Now, let us know more about, how you can make use of the IP address 192.168.1.1

How to setup your router using 192.168.1.1 Admin

192.168.1.1 Admin
Steps to setup IP Configuration

To access the router’s settings, there are a few things that are required.

  1. Make sure that the power cable is connected to the router, along with DSL or ADSL cables. This depends on what type of modem you’ve.
  2. Connect the necessary cables on the ports provided on your router.
  3. Now, connect one LAN cable, insert it into the LAN Port 1 and the other end into your system.
  4. Alternatively, you can always, use the WiFi of your router to connect too but LAN connections are much more stable as compared to WiFi network.
  5. Now, turn the power ON and wait for 2-3 minutes, so that the router boots up for the first time.

Although, the majority of manufacturer’s use 192.168.1.1 as their default IP address, if your manufacturer is using some other IP address, it’ll be mentioned on the back of your router. The information about the default username and password is also located at the back of the router.

192.168.1.1 Admin

So, now we’ve done the initial setup of the router. It is time to get into the settings panel and tweak them according to our needs.

  1. Once you are done with the initial setup.
  2. Fire up any browser (Internet Explorer is preferred) and type 192.168.1.1 in the address bar and hit enter.
  3. A new window pops up, where you are supposed to enter the username and password that has been provided by the manufacturer.
  4. Now, enter the default username and password and click on the login button. In the majority of cases, the default username and password is set to ‘admin.’
  5. This will take you to the router’s internal settings where you’ll be able to tweak the required settings.
  6. To change any setting, say you need to change the WiFi SSID and password, make sure to click on the WiFi option and enter the required details.
  7. It is mandatory to SAVE every input or else the changes that you made will vanish, once you navigate to another page.

The most common problems and their solutions while accessing 192.168.1.1 Admin

So, as most of the router’s default interface seems kind of buggy, there are a lot of issues that you may come across.

Inability to open the settings menu via 192.168.1.1 Admin

  • Here are some of the things you may need to check to fix this;
  • Check for your router’s IP address properly at the back of the router or in the user manual.
  • Make sure all the cables are connected properly.
  • Furthermore, you need to check the connection settings on your PC or MAC. Go to Internet Connection settings and make sure to change the Default Gateway settings to 192.168.1.1 under IPv4 configuration settings.
  • Restart the router and try again.
  • If nothing works, it is time to RESET your router.

How to RESET your router if you are unable to access 192.168.1.1  Admin

192.168.1.1 Admin
How to Reset Router

We’ve already mentioned, how you can reset the router to its default configuration via the settings panel by going to 192.168.1.1 address.

But what if you are unable to get access to 192.168.1.1 Admin?

  • Well, pick up the router, and make sure it is plugged in and the power is ON.
  • Check for any RESET pinhole buttons.
  • In most cases, the RESET button is located on the back or rear side of the router.
  • Use a pin and insert it into the pinhole, and gently press the button for 20-30 seconds.
  • The lights on the router will turn OFF, and the router will RESTART automatically.
  • Et voila! The router is now set to its default factory conditions.

You can now start over and do the initial setup of the router. Follow the guide that we’ve mentioned above and if you face any issues feel free to reach out to us.

For More IP Router Setup Details Visit routeriplogins.com

Add comment

Most discussed